Видео

Hi, first video of the playlist answers your question. Hope this hepls!

Do you mean the NX language? If yes, set your environment variable UGII_LANG=your_language. Hope this helps!

Ah, that would be too easy :)

Hi Eric3, I can see the video, no any problem on my computer. Are you using smartphone or computer? Maybe your settings or browser should be revised...

Please visit my channel for more Reverse Engineering video tutorials. Keep learning!

Hi, in NX12 you should use the Reverse Engineering tab and you will find a Polygon Modeling icon, or simply use the command finder and type Polygon Modeling. Hope this helps!

@@CADTutorialsSGT I have done it but I need the texture command but it doesn't exist. Also you cant use polygon modeling for every part

Hi Rulo, try to set the Assembly Load Options to As Saved, when you open your file.

Hi, you can not apply texture on stl file due to its properties (en.wikipedia.org/wiki/STL_(file_format)). Hope this helps!

Please visit my channel for more Reverse Engineering video tutorials. Keep learning!

Dear Mahalakshmi, you can download the x_t format of the full assembly from here: grabcad.com/library/belt-roller-support-5. In thhis case you can reuse the washer and bolt. Or an other way, download the missing components from online catalogue, www.traceparts.com/en/product/din-din-127-o103?CatalogPath=TRACEPARTS%3ATP01001017004001&Product=10-11062001-147996&PartNumber=DIN%20127%20-%20d%2010%20-%20s%203, bolt:www.traceparts.com/en/product/norelem-socket-head-screw-with-hexagon-socket-m10x30-steel-129-din912?Product=30-06122017-106224&PartNumber=07160-210X30 Hope this helps!

@@CADTutorialsSGTThank you so much for quick reply sir🙏🙏😍😍 Yes.. Definitely helpful for me😊

@@mahalakshmikanagaraj6630 good job for you! :)

Hi zugo, here is a nomenclature: khkgears.net/new/gear_knowledge/gear-nomenclature/#module Hope this helps!

Hi Pritesh, in newer version of NX the Thread feature was developed. If I'll have time, I try to edit a video to demonstrate it!

@@CADTutorialsSGT ok bro

Hi Manju, what is the problem, with the engagement? The positions of the gears is computed from the gear data. What do you mean on compensate for GC?

Hi Devdatta Pujari, earlier sobody has a similar question. It is not difficult, please be patient. I'm going to create a general macro (what kind of spline? sketch, model, drawing, etc.). Thanks!

@@CADTutorialsSGT Thank you very much. That will be really helpful. I just need to create Datum points coordinates chart. (X,Y,Z) to export in an excel sheet. So that I can use it to get into the drawing. Thanks again.🙂👍

@@devpujari1 In this case the macro differs, because we need the datum points info, not the spline information...

@@CADTutorialsSGT Ok. Which is best to create a macro in NX? VB or VBA? If I want to create macro to export (X,Y,Z) coordinates in excel sheet. Thank you.

Hi Phillipe Girard, nice to read you!

Hi Ayush, see this video: ruclips.net/video/yFxgOyAobNg/видео.html Hope this helps!

Hi Ayush, assembly modeling is missing, perhaps in a newer version of NXwill be modeled from the beginning to the end...

Sir assembly of chuck please provide

Hi, you are absolutely right. I missed an angle dimension between the two lines. We can see it on the status bar (1 constraint is missing). The angle is 30 degrees.

A bal oldali oszlop felülről a 2. ábrára gondol?

Hi Sefa, if you use the English language setting, the template files for prc can be found in the NX Installation folder\LOCALIZATION\prc\english\startup (in case of Chinese NX Installation folder\LOCALIZATION\prc\chinese\startup). Here you can find the template file, change it to the default file which is located in NX Installation folder\UGII\templates. Hope this helps!

@@CADTutorialsSGT thank you bro

@@CADTutorialsSGT thanks so much! it was driving me crazy, the new colours...

@@jonjon3829 here is your answer! ;)